Paralan SCSI

  •  

    MH19
    Converts HP Ultrium LVD Drive to HVD

       Paralan's Series 80 Models MH19 LVD to HVD SCSI Converter lets you add the HP Ultrium Drive to an existing High Voltage Differential (HVD) SCSI bus. This is accomplished without any impact on SCSI protocol or loss of HVD data thruput. Click on photo for installation instructions.
    Convert LVD Interface on Ultrium Tape Drive to HVDConvert LVD Interface on Ultrium Tape Drive to HVD
    Does not consume a SCSI IDDoes not consume a SCSI ID
    Requires only 5 VDC PowerRequires only 5 VDC Power
    Boardlevel version: Paralans' Series 80 Model MH19 LVD to HVD Converter lets you add the Hewlett Packard Ultrium Drive to an existing High Voltage Differential (HVD) SCSI bus, accomplished without any impact on SCSI protocol or loss of HVD data thruput
    Click on photo for enlargement.
    For complete dimensions see outline drawing.

    Hewlett-Packard

    LVD to HVD SCSI Converter

    HP Partner

    Installation Instructions
    Convert HP Ultrium Tape Drive to HVD
    Paralan's Series 80 Model MH19 LVD to HVD Converter lets you add the Hewlett Packard Ultrium Drive to an existing High Voltage Differential (HVD) SCSI bus. This is accomplished without any impact on SCSI protocol or loss of HVD data thruput.
    Mixing SCSI Device Types

    LVD cannot directly communicate with HVD SCSI. A Series 80 Model MH19 Converter enables this type of communication by converting the LVD SCSI to HVD. The presence of a Series 80 SCSI Converter will not decrease HVD data thruput.

    Paralan SCSI Converters and SCSI Expanders are completely compatible with devices that conform to the ANSI X3T10 standard.

    For a printable version of this information, please see the PDF of this data sheet.

     

    SPECIFICATIONS: LVD to HVD SCSI Converter
    Environmental
    • Relative Humidity:
      0 - 95% non-condensing
    • Operating Temperature:
      0 - 50°C
    • Storage Temperature:
      –25 to +75°C
    Power Requirements
    • Voltage:
      5 V dc ±5%
    • Current:
      Typical: 0.75 A
      Max: 0.8 A
      Note: If the Converter must power
      external HVD terminators,
      add up to 1 A additional
    		 Safety Approvals
    • UL, CSA, TUV, CE
    EMI/RFI
    • FCC Class A, CE
    Termination
    • LVD: Multimode Terminator
    • HVD: No Terminator
    Communication
    • Parallel Transmission
      Rate (sustained): 40 MBytes/sec
      (16-bit)
    		 Warranty
    • Two year limited warranty
    Weight
    • 2.5 oz (71 g)
    • Shipping weight,
      approx. 1 lb (0.5 kg)
    Physical Size
    • Height: 2.7 in. (69 mm)
    • Width: 5.3 in. (134 mm)

  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •